|
|
| |
| >>M617 Airless Paint Sprayer Description |
| |
|
→Go to Page:
[1]
[2]
[3]
[4]
[5] |
China airless paint sprayer manufacturer
- Zhejiang Yongkang Mingda Spraying Equipment Factory welcome you! We are
professional airless paint sprayer
manufacturer and exporter in China. We can
produce all kinds of high pressure airless
paint sprayers according to your
requirements. More types of high pressure
airless paint sprayers wanted, please
contact us right now!
|
|
|
Ⅰ. Safety precautions
1. As the airless paint
sprayer is a high-pressure power tool, any
inattention or improper operation,
maintenance on your unit may result in
equipment damage or severe personal injury.
So before using your sprayer, make sure you
read, fully understand, and will follow all
the safety and operating instruc-tions given
in this manual.
2. Make sure the work area is in order, with no clutters,
having sufficient visibility and be well
ventila-ted.
3. Make sure the sprayer and paint bucket is placed securely
when working. Make sure all cords,
extensions, and hoses are free from sharp
objects.
4. Always keep firm footing and balance when operating your
sprayer. Take special care especially when
you are working at heights (on scaffolding
for example).
5. Make sure the power source is securely grounded and match
the motor rating of your sprayer. If an
extension cord is needed, use one that is
heavy enough, as an undersized cord will
cause greater drop in line voltage causing
loss of power and overheating.
6. Before connecting your sprayer to power source, check
hoses for cuts, leaks, abrasion or damage or
movement of couplings, check all valves,
controls and indicators to make sure they
function proper-ly.
7. Make sure the hydraulic oil in the pump is clean and
sufficient in volume. Starting the sprayer
with-out sufficient hydraulic oil is not
permitted.
8. To prevent earlier wear of the sprayer and even equipment
failure, make sure paints and solvents to be
used with the sprayer are clean and free
from impurities.
9. Watch for spraying pressure indicated in the pressure
gauge, make sure it does not exceed 200-bar.
Make sure using the high pressure hose from
supplier.
10. Never aim the gun at any part of the body. Never allow
any part of the body to come in contact with
the fluid stream.
11. Do not use this sprayer to spray any corrosive, or
poisonous solvents (acids, banana oil,
pestici-des, fertilizers etc.)
12. Keep the sprayer free of ignition sources. Do not eat or
smoke when operating.
13. After each use, relieve pressure in the system before
turning off the motor. Then clean the syste-m (all the parts paint having flowed through)
with water or other appropriate solvents.
14. Do not transport the sprayer with power on. Disconnect
power source before cleaning or doing any
maintenance. Do not have the motor and the
plug come in contact with water, paints or
solvents.
15. Do not modify the sprayer in any way without approval.
Use only original or authorized parts for
replacement. |
|
........................................................................................... |
Ⅱ. Preparation
1. Attach the pressure
gauge, open the dustproof plug on inlet
valve. (Fig.1) |
|
 |
|
Fig. 1
|
|
2. Put
the high pressure hose on the outlet valve,
and input hose to the inlet valve, tighten
them, then loosen the prime/spray valve,
open the pressure valve.(fig2) |
|
 |
|
Fig.2 |
|
............................................................................................. |
M617 Airless
Paint Sprayer
Description:
1. Safety precautions 6. Cleaning, maintenance and storage
2. Preparation 7. Trouble shootings
3. Preparation before spraying 8. Other trouble shootings
4.Spraying instructions 9. Paint sprayer assembly,Valve assembly,Spray gun assembly
5. Turning off machine |
|
............................................................................................. |
|
|
|
Mingda Spraying Equipment Factory : China Airless Paint Sprayer Manufacturer |
|
|
|
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >> |
|
 |
